Качественный дайвер до 1000$

[Barmaleo]

что из вышеперечисленного имеет дополнительный элемент на застежке для одевания поверх гидрокостюма
и удовлетворяет стандарту ISO 6425 ?

http://en.wikipedia.org/wiki/Water_R...tches_standard

• Reliability under water. The watches under test shall be immersed in water to a depth of 30 cm ± 2 cm for 50 hours at 18 °C to 25 °C and all the mechanisms shall still function correctly. The condensation test shall be carried out before and after this test to ensure that the result is related to the above test.
• Condensation test. The watch shall be placed on a heated plate at a temperature between 40 °C and 45 °C until the watch has reached the temperature of the heated plate (in practice, a heating time of 10 minutes to 20 minutes, depending on the type of watch, will be sufficient). A drop of water, at a temperature of 18 °C to 25 °C shall be placed on the glass of the watch. After about 1 minute, the glass shall be wiped with a dry rag. Any watch which has condensation on the interior surface of the glass shall be eliminated.
• Resistance of crowns and other setting devices to an external force. The watches under test shall be subjected to an overpressure in water of 125% of the rated pressure for 10 minutes and to an external force of 5 N perpendicular to the crown and pusher buttons (if any). The condensation test shall be carried out before and after this test to ensure that the result is related to the above test.
• Water-tightness and resistance at a water overpressure. The watches under test shall be immersed in water contained in a suitable vessel. Then an overpressure of 125% of the rated pressure shall be applied within 1 minute and maintained for 2 hours. Subsequently the overpressure shall be reduced to 0.3 bar within 1 minute and maintained at this pressure for 1 hour. The watches shall then be removed from the water and dried with a rag. No evidence of water intrusion or condensation is allowed.
• Resistance to thermal shock. Immersion of the watch in 30 cm ± 2 cm of water at the following temperatures for 10 minutes each, 40 °C, 5 °C and 40 °C again. The time of transition from one immersion to the other shall not exceed 1 minute. No evidence of water intrusion or condensation is allowed.

а также

• The presence of a time-preselecting device, for example a unidirectional rotating bezel or a digital display. Such a device shall be protected against inadvertent rotation or wrong manipulation. If it is a rotating bezel, it shall have a minute scale going up to 60 min. The markings indicating every 5 min shall be clearly indicated. The markings on the dial, if existing, shall be coordinated with those of the preselecting device and shall be clearly visible. If the preselecting device is a digital display, it shall be clearly visible.
• The following items of the watch shall be legible at a distance of 25 cm (9.8 in) in the dark:
  time (the minute hand shall be clearly distinguishable from the hour hand);
  set time of the time-preselecting device;
  indication that the watch is running (This is usually indicated by a running second hand with a luminous tip or tail.);
  in the case of battery-powered watches, a battery end-of-life indication.
• The presence of an indication that the watch is running in total darkness. This is usually indicated by a running second hand with a luminous tip or tail.
• Magnetic resistance. This is tested by 3 expositions to a direct current magnetic field of 4 800 A/m. The watch must keep its accuracy to ± 30 seconds/day as measured before the test despite the magnetic field.
• Shock resistance. This is tested by two shocks (one on the 9 o'clock side, and one to the crystal and perpendicular to the face). The shock is usually delivered by a hard plastic hammer mounted as a pendulum, so as to deliver a measured amount of energy, specifically, a 3 kg hammer with an impact velocity of 4.43 m/s. The change in rate allowed is ± 60 seconds/day.
• Resistance to salty water. The watches under test shall be put in a 30 g/l NaCl (sodium chloride) solution and kept there for 24 hours at 18 °C to 25 °C. This test water solution has salinity comparable to normal seawater. After this test, the case and accessories shall be examined for any possible changes. Moving parts, particularly the rotating bezel, shall be checked for correct functioning.
• Resistance of attachments to an external force (strap/band solidity). This is tested by applying a force of 200 N (45 lbf) to each springbar (or attaching point) in opposite directions with no damage to the watch of attachment point. The bracelet of the watch being tested shall be closed.
• Marking. Watches conforming to ISO 6425 are marked with the word DIVER’S WATCH L M or DIVER'S L M to distinguish diving watches from look a like watches that are not suitable for actual scuba diving. The letter L indicates the diving depth, in metres, guaranteed by the manufacturer.

[Ak47se1]

То где написано diver's ххх m
Я подозреваю что ни одни из вышеперечисленных часов такой надписи не имеют

[Barmaleo]

Сообщение от Ak47se1

То где написано diver's ххх m
Я подозреваю что ни одни из вышеперечисленных часов такой надписи не имеют

кроме поста №7
http://forum.watch.ru/showpost.php?p...37&postcount=7

ну и конечно Зинн (у немцев свой стандарт DIN 8306)

http://www.sinn.de/en/Modell/U1.htm - автомат
http://www.sinn.de/en/Modell/UX.htm - супер-точный кварц

[Neurohirurg]

Сообщение от Barmaleo

ну и конечно Зинн (у немцев свой стандарт DIN 8306)

http://www.sinn.de/en/Modell/U1.htm - автомат
http://www.sinn.de/en/Modell/UX.htm - супер-точный кварц

плавно подбираясь к Омеге....
Я бы купил Сейко - сумо. Качество отличное, цена - 600 долларов. Но правда Японец. К тому же еще культовая модель.

[Barmaleo]

Цертина с каучком будет порядка 800 баксов

[archi]

Guinand

http://guinand-watch.com/index.php?o...196&Itemid=435

http://www.youtube.com/watch?v=jkSgA...&feature=feedu

http://www.watchlounge.com/wbb3/wl/w...-diver-g-330m/

[krtk]

Longines Hydroconquest и Maurice Lacroix Miros Chrono Diver прикольные, но на браслете как назло


PS. ТС а зачем Вам дайвер на ремешке?[/quote]
Не знаю))) но на данный момент перемерив часы с браслетом и ремешком, больше был расположен к ремешку-я с ним как то увереннее себя чувствую..

[krtk]

кстати насчет кварца или механики, не принципиально, хотя и понимаю, что взгляд на данный вопрос не особо правильный

[Barmaleo]

ув. krtk - вам "сурьезные" дайверские часы нужны или просто понырять чтобы можно было или стиль-дайверские ?

[yurikim]

Сообщение от krtk

кстати насчет кварца или механики, не принципиально, хотя и понимаю, что взгляд на данный вопрос не особо правильный

Тут дело собственного выбора
Либо красота механизма, душа, шестереночки и прочие вкусности, либо надежность, точность и не бояться задеть часами за коралл и стукнуть о баллон